Pieces of Commercial Truck Components
When purchasing a commercial truck, there are several important parts to look for. The frame acts as the “backbone” of the truck and must be parallel to the axels. The axles must also be perpendicular to the frame centerline to ensure proper handling and tire life. These components are inspected on a laser alignment machine and an angle machine to ensure the right alignment. In addition, they must be connected to the engine to determine how much power is generated by the engine.
An engine and transmission are essential parts of a commercial truck, which need to be maintained to prevent fuel waste and increase costs. While manual transmissions are great for hauling lighter loads, automatic transmissions are better for carrying heavy loads. Poor transmissions may also affect the performance of your fleet. When choosing between manual and automatic transmissions, consider the following factors to decide which is right for your commercial truck. A faulty transmission could mean lost business.
Suspensions isolate the body from the wheels. The modern type uses springs to allow the wheels to move independently. The spring rate controls the stiffness of the springs. Some manufacturers of commercial truck components include Gabriel HD and Stemco. Air suspensions and axles can break down, resulting in poor handling. Therefore, drivers should pay close attention to their truck’s handling and make sure the suspension components are working properly.
7 Most Important Pieces of Commercial Truck Components
Driveshaft: The driveshaft is a critical piece of the commercial truck driveline. It provides the initial connection between the transmission and driveline. Driveshafts contain many parts, which must be in good condition to ensure maximum performance. Another important piece of commercial truck components is the PTO shaft. A PTO shaft transfers power from the engine to the attached equipment. It can also help improve fuel economy, reducing fuel consumption.
The frame: A truck’s frame is comprised of two rails, either parallel or C-shaped. In North America, refuse trucks use a cab-over configuration to increase maneuverability. These trucks are some of the most severe duty trucks on public roads. Semi-tractors, on the other hand, have a fifth wheel that tows the semi-trailer. Commercial truck manufacturers differ across jurisdictions.
The dashboard: The dashboard is made up of many pieces. These pieces include the instrument panel, the steering column, brake chambers, and the hood. These components are attached to the chassis via wires and hoses. All parts must be mounted properly and be connected to one another. Ensure the axle seals are tight, as they are critical to preventing accidents. If you have a faulty dashboard, you should consult a truck technician.
