As a UK car owner, one of the things you will need to go through is an ITV test. Whether you are going for an ITV test Welling or at one of the other garages in Kent, they all have the same procedure when it comes to the ITV test. This means that you can expect the same results no matter where you go.
An MOT test is part of the government’s attempt to ensure that people drive roadworthy vehicles. Once a car has completed three years of operation on the road, the Ministry of Transport requires that it undergo regular tests to see if it is in good working order and meets government standards. The test checks both safety and environmental requirements. There are more than 21,000 service centers across the country that are qualified to administer the test and exam.
However, the MOT test is very different from a normal service check. For one thing, it doesn’t touch your engine, clutch, and gearbox. It focuses on the other parts of your car, such as the tires, the electrical system, and more. Also, a technical inspection only tests your car. If nothing happens, your car will be left alone. But if the standards are not met, your car will have to be repaired until it meets them.
When going through the ITV, there are several parts of the car that are checked:
tire check
Your car’s tires will be checked to see if they are roadworthy. How much wear is evaluated, while notable damage is verified and the age of the tire is asked. If the safety threshold is not reached, the workshop will have to repair your tires.
light control
Seeing and being seen on the road is important. That is why your lights are part of the ITV controls. If any of the lights fail then they should be replaced and put back into operation. However, you could do this beforehand so the MOT tester doesn’t waste their time.
Fluid level check
Your car runs on motor oil. You need to have enough quantities for the car to work properly. The windshield washer fluid is also checked. If it’s missing, your car will get a refill or an oil change.
brake checks
Your car’s brakes are what make sure you don’t have an accident. You want brakes that allow your car to stop on a dime so you don’t hit anyone or anything. There are several factors that affect the operation of the brakes and all of them are checked during the technical inspection. When your brakes are bad, it’s an accident waiting to happen, which is why the MOT tester will try to get it working to safety standards.
Dash Light Check
Your dashboard lights tell you if something is wrong with your car. They need to work well and that is why the technical inspection tests them. eMOT focuses on warning lights so you know when your car is experiencing a problem.
horn control
Your car horn warns people on the road. It is an important part of pedestrian safety, which is why it is part of the technical inspection. If it doesn’t make any sound or lags, it will be fixed.
